Products

Gravity Diverter Valves

The Gravity Diverter is also used to reroute product from one  line to another, but is used only in gravity flow applications.  The body is fabricated from mild steel or stainless steel.  An internal flap plate is also mild steel or stainless steel, with a polyurethane rubber wiper seal.  For more abrasive applications, a bucket type diverter is used where an internal chute is moved back and forth to divert product flow.  Operation is either by pneumatic air cylinder, electric linear actuator, manual lever arm or rotary type actuators. Since these units are fabricated, practically any size or divert angle can be manufactured.  Units are available as 2-way (one inlet and two outlets) or 3-way (one inlet and three outlets).  Typical divert angles are 30×30 and 0x30, but again – special angles can be made.  Flanges are round, square or even rectangular.

Gravity Diverter Valves

The Gravity Diverter is used to reroute product from one line to another in gravity flow applications.

The body is fabricated from mild steel or stainless steel.  An internal flap plate is mild steel or stainless steel, with a rubber wiper seal.

For more abrasive applications, a bucket type diverter is used where an internal chute is moved back and forth to divert product flow.

Operation is either by pneumatic air cylinder, electric linear actuator, manual lever arm or rotary type actuators. Since these units are fabricated, practically any size or divert angle can be manufactured.

Units are available as 2-way (one inlet and two outlets) or 3-way (one inlet and three outlets).  Typical divert angles are 30×30 and 0x30, but again – special angles can be made.

Flanges are round, square or even rectangular.

 

Contact

Features & Benefits:

  • Round or Square Flanges standard.
  • 30 x 30 degree or 0 x 30 degree standard.
  • Special angles available.
  • Pipe & Tube Ends available.
  • Mild Steel or Stainless Steel Construction.
  • Pneumatic or manual.
  • Custom design capability.
  • Pneumatics and switches housed in guards.

Specification:

BODIES

Fabricated Mild Steel or Stainless Steel.

FLAP VALVES AND SPINDLES

Mild Steel or Stainless.

WIPER SEAL

Polyurethane or food quality rubber.

ACTUATION

Air cylinder, Electric Linear Actuator or manual.

PNEUMATIC VERSION

Complete with five-port four way single coil solenoid valve.

LIMIT SWITCHES

Available to indicate open/closed conditions. Pneumatics and switches housed in guards.

CONNECTIONS

Square Flanges, Round Flanges or Spigots.

 

Specifications
Fabricated Body Flap Type Diverter
30 x 30 degree or 0 x 30 degree Round or Square
INDUSTRIES
Food Plastics & Petrochemical Animal Feed
Mining & Minerals Chemical
Systems
Gravity Flow Only

 

Functions
Pneumatic Air Cylinder Electric Manual Lever

Related products